PRODUCTS
HOT PRODUCTS
Multi-function hot air welding machine
DETAILED PARAMETERS：
| Power Consumption | 50-60Hz 220V50-60Hz |
| Rated Power | 2500W |
| Rated current | 20A |
| Woking Speed | 1m-15m/min |
| Working pressure | 3-6kg/cm2 |
| Upper Roller Pressure. | 0.5kg/cm2-4.5kg/cm2 |
| Nozzle width | 10-50mm |
| .Upper Roller Lift | 20-30mm |
| Upper Roller Diameter | Ф 80mm |
| Width of the roller | 10-50mm |
| emperature | up to 750。C |
| Adhesive Tape Width | 10-60mm |
| Exterior dimensions | 1700x550 x1730mm |
| Vet weight | 210kg |
APPLICATION SCENARIOS：
Whole design: No table, extra-wide lower prop design, adjustable angle of the lower prop, suit to processing the Large tents, Rubber boats, Air Balloon, Seamless sewing products etc.
Control system: Designed with original computer chips, it can be programmed according to the needs of users. The microcomputer automatic controls the work of the whole machine, with simple operation, stable action performance , and low failure rate.
Display: It is a 4.3 inch touch screen and can directly show all kinds of data. Temperature Control: Temperature is Automatic tracking controlled by computer.
Speed Control: The temperature is controlled by Computer Chip, two-speed motor, separate upper and lower roller motor, can adjust its speed.
Protective Measures: Turn on the Heating button, later turn it off and then delay the shut down, get into count down.
